Mayan Theatre
The Mayan Theatre on Broadway is a reliable orientation point for the northern end of Baker, and we time arrival windows around evening show traffic.
Your local Baker HVAC service
HVAC in Baker Built for Historic Brick Victorians
Your Victorian was built for coal heat, not central air. We work Baker's late-1800s brick homes every week, from the Queen Anne rows near Broadway to the Denver Squares around Dailey Park. Boilers, old chimneys and landmark-district rules shape every job here. Call (720) 806-7634 and tell us what your system is doing.
Call any hour
Request service today
Call (720) 806-7634 and tell us what is happening. We are open 24 hours, 7 days a week.
Call Now (720) 806-7634 → No spam. No obligation. Just practical help.Open 24 hours7 days a week
5.0 starGoogle rating · 11 reviews
Furnace · AC · Heat pumpsRepair & replacement
Services available in Baker
HVAC Services We Run Through Baker
Baker's brick Victorians were heated with coal before they were heated with gas, and more than 80% of the neighborhood was built by 1900. Old chimneys, radiators and plaster walls — plus a landmark district designated in 2000 — set the terms for every heating and cooling decision here.
Boiler RepairA Baker boiler is often a gas-fired successor to a coal system, feeding radiators through pipes older than the house's wiring. The check covers water pressure, the circulator, the expansion tank and the flue — an unlined coal-era flue is a known hazard in these houses, so venting gets a careful look.View details →Ductless Mini-Split InstallationVictorians with plaster walls and no ductwork take cooling best through a wall head or two, with the outdoor unit placed where the landmark district's design review allows it. The rooms that get used most get cooled; the plaster stays intact.View details →Furnace RepairConverted Victorians and bungalows running gas furnaces get the same first look: burner, flame sensor, heat exchanger and the chimney the furnace vents through. In a house this old, the flue's condition matters as much as the furnace itself.View details →Air Conditioning RepairA retrofitted cooling system in a Baker Victorian usually fails at the condenser, the capacitor or a refrigerant leak in lines run through a century-old shell. Gauges and a leak check find the fault; airflow gets checked too, since the ducts were an afterthought in these houses.View details →Boiler MaintenanceOnce a year, before the cold sets in, the boiler gets cleaned at the burner, the flue inspected, the relief valve tested and the water checked for scale from Denver's hard water. It is the visit that finds a cracked section while it is still a repair.View details →
More than a service list
How We Run HVAC Work in Baker
A Baker Victorian asks for different decisions than a newer house. These are the three we make most often here.
The coal-flue problem: old chimneys, old boilers
Many Baker homes were built for coal heat, and some still have unlined flues, missing liners and soft mortar. A new boiler on a failing flue is a safety problem, not a heating upgrade.
How we help: We inspect the chimney and flue as part of boiler and furnace work, and we flag landmark-district review steps for chimney work inside the historic district before anything is scheduled.
No ducts, plaster walls, landmark rules
Victorian brick homes were not built with ductwork, and opening plaster walls to add it is disruptive. In the historic district, exterior condenser placement also needs design review.
How we help: We lean on ductless mini-splits and high-velocity small-duct options for cooling, and we plan condenser placement with the review process in mind from the start.
Narrow lots and alley-only access
Side yards in Baker can be three feet wide, and alley access is tight. A standard condenser pad may not fit, and service clearance can be impossible if the unit is jammed against a fence.
How we help: We measure the pad location before delivery, choose a slim or side-discharge condenser when space is tight, and set the unit so a tech can still open the service panel.
Early warning signs
Have us take a look →
Signs You Need HVAC Service in Baker
01
Boiler leaking water near the base
02
Furnace blows cold air in winter
03
AC runs but the air from the vents is not cold
04
A soot mark or a damp patch around an old chimney
05
Energy bills jump without a change in how you use the system
We know the route
Navigating Baker: Landmarks We Use
Baker is compact, but the one-way streets and narrow blocks make navigation matter. We use Broadway and Santa Fe Drive as the main corridors, and the Baker Historic District boundaries tell us which jobs need historic-sensitive handling.
Dailey Park
Dailey Park sits in the middle of Baker and helps us split the neighborhood into north and south service zones, which keeps drive times short.
Broadway Marketplace
Broadway Marketplace anchors the commercial stretch of Broadway and is our reference point for nearby commercial HVAC calls.
Santa Fe Drive
Santa Fe Drive is the main north-south route through Baker and our primary corridor for commercial and multi-unit calls.
Primary Baker response zone
Baker service coverage
Is your street on the route?
These are the blocks and corridors we serve most often in Baker. Nearby areas may also qualify—call if you do not see yours.
Popular neighborhoods
Check my address →
Baker Historic District, the Broadway and Santa Fe corridors, Dailey Park blocks and the Alameda edge.
Google reviews
Rated 5.0 Stars on Google
5.0★★★★★11 Google reviews
Lion Tech Home Services holds a 5.0-star rating from 11 Google reviews.
Outside Baker?
Baker and the Surrounding Service Area
01Capitol HillCapitol Hill is just northeast of Baker, with a similar mix of older homes and small commercial buildings. Work in Baker often pairs with Capitol Hill calls nearby.↗02Lincoln ParkLincoln Park is north of Baker across 6th Avenue, where older brick homes and new development sit side by side.↗03Washington ParkWashington Park is southeast of Baker, a short drive down the same corridors, with many of the same duct and boiler issues.↗04Athmar ParkAthmar Park is south of Baker, where post-war brick ranches replace the Victorian stock and basement furnaces are the norm.↗
Baker HVAC FAQ
HVAC in Baker: Common Questions
Lion Tech Home Services can help if your question is not answered here.
Call (720) 806-7634 →Usually, yes. Ductless heads cool the rooms that need it without opening plaster walls, and high-velocity small-duct systems are the other route when a house can take narrow runs. The right choice depends on the rooms used most and on where an outdoor unit can sit.
Baker's historic district, designated in November 2000, covers about 30 blocks in the northeast of the neighborhood, and visible exterior changes — condenser placement and chimney work included — generally need Landmark Preservation design review before a permit. Placement gets planned with that review in mind, early, so it does not stall a job halfway through.
It comes down to the boiler's condition, the radiators and the flue. A pressure test and a look at the heat exchanger and venting show whether a repair buys real years or whether the money is better spent on a replacement. The findings get laid out so the decision is made with the facts in front of you.
Victorian brick was built to hold heat, not to shed it, and the upper floors were never part of any cooling plan. One wall head upstairs usually does more than a larger system downstairs, because the problem is distribution, not capacity.
Baker HVAC service is ready
Need HVAC Help in Baker?
No heat, no cooling, or a boiler making noise? Call Lion Tech Home Services at (720) 806-7634. We are open 24 hours, 7 days a week.
Request Baker service
Call (720) 806-7634 — open 24 hours
Lion Tech Home Services, Denver — call (720) 806-7634, open 24 hours.